This page shows a table of useful console commands and what they are used for.
Open console command overlay
- Press the ` key (backtick) shortcut
(often re-bound to the INSERT or HOME key)
This can be done at runtime.
- Open Edit → Project settings
- Search for Engine → Input → Console
- Edit key value
Changing the shortcut in the Editor's preferences will not be sufficient. The shortcut might not work in Live mode.
Pixotope console commands
|Console command||Details||Default value|
|FrameMatcher.AllowReplacement||Replace missing packets, detected using packet numbers. Either with copies or interpolated||1|
|FrameMatcher.AllowInterpolation||Replace missing packets with interpolation. CTSReceiverCameraTracker.bEnablePacketReplacement must be 1||1|
|FrameMatcher.Method||Overrides frame matching method set in Syncing panel. Use FrameMatcher.Method ? to see more information.||-1|
|stat PixotopeCameraTrackerComponent||See camera tracker component stats|
|stat ctsreceiver||Ctsreceiver plugin stats must be called after Stat PixotopeCameraTrackerComponent|
|CTSReceiver.EnableCrosshair||Turn on crosshair for tuning decentering||0|
|CTSReceiver.AllowCrosshair||Allow seeing the crosshair when a true value, when false no crosshairs are allowed even if CTSReceiver.EnableCrosshair is true or Show Crosshair in Director is checked.||1|
|CTSReceiver.EnableFocus||Set to 0 to disable dof, set to 1 or another true integer to enable dof||1|
|showflag.depthoffield||Set to 1 to enable dof, 0 disables dof||2|
|r.depthoffieldquality||Set to 1 to enable dof, 0 disables dof||2|
|CameraTracker.DisableNcamMapBackplane||A redundant method to disable the backplane with NCAM MAP distortion. Set to 0 to include the backplane||1|
|CameraTracker.Overscan||When greater than 0 the calculated overscan is multiplied by this, use if more overscan is needed.||-1|
|Pixotope.PrintCameraTracking||Set to 1 to print incoming camera tracking packets in editor viewport||0|