Add a camera system
A camera system is a camera including its lens and a tracking system. The result is a tracked camera with various other tracked parameters depending on the tracking system you use.
Click "Add camera system"
Give it a descriptive name
Configure the camera and lens
Choose a filmback size that matches your output video aspect ratio
Choose from the drop-down of known cameras
All supplied camera definitions are either 16:9 or 17:9 in aspect ratio. Their aspect ratio is defined by their filmback width and height dimensions. If you do not match aspect ratios, the output image may be “letter-boxed” or “pillar-boxed” into the output video frame.
Or create your own for non-standard aspect ratios
Click on "Add camera type"
Enter camera type name
Enter width and height of the filmback (sensor size in millimeters) - check the documentation of your camera for the filmback size related to the aspect ratio you are shooting in
Choose your lens aperture
This is important when visualizing depth of field later on
Configure camera tracking
Here you configure everything related to the camera tracking system.
Choose the assigned tracking service
Best practice: Use the tracking service on the machine the camera system will be routed to
Change the port if needed
This is where your tracking data should be sent to
On your camera tracking system: Enter the IP address and port number of the assigned tracking service
For the Ncam system, the IP address and port number should be entered in the Advanced section of the camera tracking protocol
Choose the camera tracking protocol for your camera tracking system
Check the status field
Your tracking configuration is set up correctly if it shows incoming data
You can also check the Network status in the Editor
Optionally override some advanced settings
The "Advanced" section covers protocol-specific details and how the data should be mapped. When you calibrate tracking, you might have to come back here if the camera movement is mapped wrongly.
When using a Distortion mode in combination with a lens file where Distortion is disabled, make sure to also disable Center Offset (Lens tracking > Advanced).
Choose a camera mount
Depending on the camera tracking protocol, you can choose between up to 3 different camera mount types:
No mount setup
For advanced camera tracking systems that provide correct position and rotation values out of the box e.g. Ncam
For untracked cameras
For tripods and dolly-mounted cameras
For PTZ cameras
For camera-crane-mounted cameras
The helper images provide information on the measurements needed.
Optionally choose a lens file under Lens tracking > Advanced
Camera tracking systems most often have lens data (focus and/or zoom) integrated into their configurations. However, if you need to use a custom lens configuration, choose the lens file from the drop-down menu, and optionally edit the zoom and focus encoder limits.
A lens file contains additional calibration data for the lenses you are using. It can include the following parameters: Focus Distance, Distortion, Nodal Offset, FOV, and Center offset. These files can be generated:
manually by using the provided lens file template
by our internal Lens Calibration tool
from lens files of other manufacturers, using our internal conversion tools
Continue to Configure object tracking