Useful console commands
This page shows a table of useful console commands and what they are used for.
Open console command overlay
- Press the ` key (backtick) shortcut
(often re-bound to the INSERT or HOME key)
.png?inst-v=f1405afc-2ffe-4927-9668-2cdab5f6f7ff)
This can be done at runtime.
Change shortcut
- Open Edit → Project settings
- Search for Engine → Input → Console
- Edit key value
Changing the shortcut in the Editor's preferences will not be sufficient. The shortcut might not work in Live mode.
.png?inst-v=f1405afc-2ffe-4927-9668-2cdab5f6f7ff)
Pixotope console commands
| Console command | Details | Default value |
|---|---|---|
| FrameMatcher.AllowReplacement | Replace missing packets, detected using packet numbers. Either with copies or interpolated | 1 |
| FrameMatcher.AllowInterpolation | Replace missing packets with interpolation. CTSReceiverCameraTracker.bEnablePacketReplacement must be 1 | 1 |
| FrameMatcher.Method | Overrides frame matching method set in Syncing panel. Use FrameMatcher.Method ? to see more information. | -1 |
| stat PixotopeCameraTrackerComponent | See camera tracker component stats | |
| stat ctsreceiver | Ctsreceiver plugin stats must be called after Stat PixotopeCameraTrackerComponent | |
| CTSReceiver.EnableCrosshair | Turn on crosshair for tuning decentering | 0 |
| CTSReceiver.AllowCrosshair | Allow seeing the crosshair when a true value, when false no crosshairs are allowed even if CTSReceiver.EnableCrosshair is true or Show Crosshair in Director is checked. | 1 |
| CTSReceiver.EnableDistortion | Enable distortion | 1 |
| CTSReceiver.EnableFocus | Set to 0 to disable dof, set to 1 or another true integer to enable dof | 1 |
| showflag.depthoffield | Set to 1 to enable dof, 0 disables dof | 2 |
| r.depthoffieldquality | Set to 1 to enable dof, 0 disables dof | 2 |
| CameraTracker.DisableNcamMapBackplane | A redundant method to disable the backplane with NCAM MAP distortion. Set to 0 to include the backplane | 1 |
| CameraTracker.Overscan | When greater than 0 the calculated overscan is multiplied by this, use if more overscan is needed. | -1 |
| Pixotope.PrintCameraTracking | Set to 1 to print incoming camera tracking packets in editor viewport | 0 |